Amaco Alligator
 Amaco Alligator brush-on glaze, product summary
A matt texture, firing range between 990 to 1060 deg C although Amaco recommend that R4077P LT22 Tahitian Blue is fired to Cone 06.

For best results, apply 3 even coats to bisque allowing the glaze to dry between the coats.

The samples show the results we achieved on both light coloured and red clay and were all fired at 1040 deg C in an electric kiln.

Some of the range are NOT food safe, e.g. R4080P, R4085P, R4087P & R4088P. Please check at the individual product level.

Details of sample preparation
The glaze samples are based on a 4cm square tile of a pale clay.
A diagonal stripe of red slip was then applied to simulate the effect on red clay.
The red clay is always shown in the bottom right hand corner.
For matt finishes, a clear glaze was applied on an opposite diagonal.

EARTHENWARE - We poured P1616 Casting slip into a tile mould and when dry brushed on 2 coats of UG38 Light Brown Contem underglaze with a hake, on the right hand diagonal to represent red coloured clay and   biscuit fired to 1000 deg cent.  We brushed on 3 coats of the glaze with a hake and re-fired to 1040 deg cent. in an electric kiln.


Safety Data - fact sheets are available for one or more of these product items view factsheet list