Underglazes
The FULL PRICE is as listed with only delivery charges to be added.

Delivery by postage or courier is AT COST only.

chris_hesketh@hotmail.com

For price comparisons, remember to factor in the impact of VAT and delivery.
Amaco Velvet (Leadfree)
 Amaco Velvet (Leadfree) underglaze, product summary
The velvet underglazes can be left unglazed leaving a matt surface, alternatively a clear glaze can be applied.

The firing range is from 1040 to 1220 deg C.

Apply 1 coat for a translucent finish, and 3 coats for opaque.

Details of sample preparation
The glaze samples are based on a 4cm square tile of a pale clay.
A diagonal stripe of red slip was then applied to simulate the effect on red clay.
The red clay is always shown in the bottom right hand corner.
For matt finishes, a clear glaze was applied on an opposite diagonal.

UNDERGLAZES (Brush-on) - We poured P1616 Casting slip into a tile mould and when dry brushed on 2 coats of UG38 Light Brown Contem underglaze with a hake on the right hand diagonal to represent red coloured clay and   biscuit fired to 1000 deg cent.  We brushed on 3 coats of the underglaze with a hake.  As these glazes can be left unglazed, we glazed with Potterycrafts Ltd P2017 across the diagonal to represent the effect on both light and red clays and re-fired to 1040 deg cent. in an electric kiln.


Safety Data - fact sheets are available for one or more of these product items view factsheet list